Quality. For new buildings and refurbishments.

Quality.

For new buildings and refurbishments.

Tips for ventilation, cleaning and maintenance

 

How to care for your new PVC window frames

aluplast window profiles are made of weathering resistant high-quality PVC that requires low maintenance. Common soiling on the even, non-porous and hygienic surface caused by rain and dust can easily be removed with normal washing-up liquid.

Never use cleansing agents that can damage the surface as abrasives or chemicals (e.g. nitro diluter), benzene or similar agents. Clean your windows as required according to the type and level of soiling. In the case of soiling that cannot be removed as described here, please consult your local aluplast partner.


How to care for the gaskets

The gaskets of your PVC window are made of high-quality weathering and ageing resistant rubber. Remember when cleaning your windows to also remove dust and soiling from the gasket.

To durably conserve the gaskets’ elasticity and functionality apply special silicone oil every now and then.

To purchase cleansing and care products please contact your local aluplast partner.


How to care for the hardware

To conserve your hardware’s functionality and movability you should lubricate it once in a while. Use oil to lubricate the movable parts of your hardware and non-corroding grease or petroleum jelly (Vaseline) for the locking points.

By this means you can conserve your windows’ functionality.

For further information please consult your local aluplast partner.


Ventilation and heating

Modern PVC windows present such a high tightness that no natural air exchange can take place. Proper ventilation in combination with modern windows saves heating costs and creates a healthy and hygienic room climate.

Cross ventilation with two opposite windows is especially quick and effective – one single open window is sometimes not enough. Ventilate at least five to ten minutes to let in fresh air.

It is recommended to ventilate three to four times a day. Remove items that obstruct the air flow, e.g. move furniture away from the wall a little. Ventilate more frequently in the case of additional humidity, for example when cooking, bathing, taking a shower etc. Please remember: A misted-up window is the best indicator that ventilation is required.

To regulate the air exchange automatically, the ventilation systems Basic Air plus® or REGEL-air® can be integrated into your window.


Initial cleaning of PVC windows after installation

Despite all the care taken by the craftsmen during installation, soiling as mortar splatters, fingerprints, wallpaper paste, colour splatters etc. may occur. Most soiling can easily be removed. Mortar and colour splatters generally can be removed with a semi-rigid putty knife. Carefully scrape the soiling off and wipe with a damp cloth.

Take care not to damage the surfaces as the small, sharp pebbles may leave scratches. Adhesive residues on the glass can carefully be removed with a sharp razor blade.

 

aluplast worldwide

aluplast weltweit
 

office and showroom

aluplast India Pvt. Ltd.
aluplast House
C44, DDA Shed
Okhla Industrial Area
Phase 1
New Delhi - 110020
India
info.in@aluplast.net

works

aluplast India Pvt. Ltd.
Plot No. 730
GIDC Savli
Vadodara - 391775
Gujarat
India
Tel.: +91-2667-267700
Fax: +91-2667-267799
info.in@aluplast.net

support

Info: +91-7042294330 Office: +91-7042294331 Tech: +91-9099599391       Toll Free: 1800 233 4777

 
 
 

quick links

quick access to the most important information

technical glossary

colour and design

innovations

aluplast worldwide

 
aluplast worldwide

office and showroom

aluplast India Pvt. Ltd.
aluplast House
C44, DDA Shed
Okhla Industrial Area
Phase 1
New Delhi - 110020
India
info.in@aluplast.net

works

aluplast India Pvt. Ltd.
Plot No.730
GIDC Savli
Vadodara - 391775              Gujarat
India                                                                                                                                        

Tel.:+91-2667-267700
Fax:+91-2667-267799
info.in@aluplast.net

support

Info: +91-7042294330
Office: +91-7042294331
Tech: +91-9099599391
Toll Free: 1800 233 4777